How to Solve the Problem of Clicking Noise from the Air Conditioning

Although you can never wake up a person who is pretending to sleep, you can turn off the air conditioning and try!

Whether it's hot summer or cold winter, air conditioners can create a comfortable living environment for us.

Air conditioners have many advantages and have become a must-have appliance for every household.

During the use of air conditioners, many people will find that the sound of the air conditioner is particularly loud, which will greatly affect our sleep quality. There are many reasons for the loud sound of the air conditioner.

One of the reasons is the noise from the motor itself.

For most cases, the loud sound from the motor is caused by a bad bearing, so the solution is to replace the bearing. It's easy to buy a bearing, so you can just take it apart and install a new one.

Another reason is the noise from the ceiling unit.

For ceiling units, many times the noise is caused by the installation worker sitting on the air conditioner, which causes the unit to be out of shape and the motor to sink, making the fan collide and make noise. This is a common problem, so you need to check the machine from the outside and fix it.

Third, the abnormal noise from the indoor unit of the air conditioner.

For both ceiling units and cabinet units, the whole indoor unit is shaking very much. Carefully check the fan and you will find that the fan blade is broken.

If there is only a small breakage, the fan will lose balance when it turns, so you need to replace the fan blade.

Fourth, the collision noise from the贯流风扇 of the wall unit air conditioner.

To solve this problem, you need to judge whether it's a left or right collision. If it's a left collision, it's usually the bearing of the fan rotor, and the outer ring of the bearing is usually made of rubber. You can fix it by adding something. If it's a right collision, the noise may be caused by the old fixed rubber of the motor. You can also fix it by adding something.

If the air conditioner has been disassembled and the fan position is not correct, you can just adjust the position of the fan.

We also recommend:

Original article link: